装备型号 Model Number Номер модели JYJ-600-AH
资料厚度 material thickness Толщина обода ≤4.5mm
加工工件宽度 Rim Width Ширина обода ≤320mm
直径规模 Rim Diameter Range Диаметр обода 300mm~500mm
输出功率 input capacity Общая мощность 14KW
This coiler machine is special equipment that is used for steel plate coiling. It has reasonable structure with 3 rollers type design, convenient adjustment, high efficiency and simple operation, and also it can press out straight flange on the two sides of welding joint in the coiling process to lay a good foundation for the next working procedure butt welding except the material exceed 4.5mm.
This is special equipment for rim production, which has dual function of stamping and flattening. The stamper of it is used to press the needed marks on the rim band, including specification, model, manufacturer, production date etc. It flattens weld joint for the following welding operation.
Automatic operating for feeding-stamping-coiling-flattening weld joint
Equipment Structure Introduction
The equipment includes four parts：automatically feeder, stamper, coiler and flattening device.
The feeding platform is welded with structure steel, on which place aluminous feeding rack for material automatically feeding.
The stamper is made of upper and lower roller. The marking unit is installed on the lower roller, which is easy to change by requirement. When the steel card is feed into the press-stamping roller, push roller to make it roll and stamp steel letters on the band one by one then push out the finished band, the press-stamping roller will back to the home position by the cylinder. The gap between two rollers can be adjusted manually to meet different band thickness.
Rim Diameter Range
This equipment’s electrical system consists of PLC (Programmable Logic Control), contactor, frequency converter, servo system, motor and different kinds of detecting sensor. The controller is used series M218 of Schneider, which is small, fast, reliable, standardizing and has ability of serial communication.
Equipment’s Operation Mode
The main machine has two kinds of working mode--- auto and manual, which can choose by turning the “auto/manual” button.
Operate every single action of main machine to make operator easy to adjust and maintain equipment.
Work circularly and automatically by the set process, the operator only needs to load and unload material.
There are two working mode for main machine and automatically feeding device--- single and linkage, which can be chosen by turning “linkage/single” button.
Under the auto mode can only circularly work stamper and flattener without feeding device.
Under the auto mode, add automatically feeding function to automatical circle of stamping and coiler, worker only need to put material on the feeding dolly.
Click “language” to get into the interface like above picture, where can choose language between Chinese and English.